Products
XPJ978 Papermaking coating foam inhibitor
Product Introduction
XPJ978 specializes in coating materials and paper coating process design, with a strong defoaming, anti-foaming function; The product does not contain amide, silicone oil, mineral oil, solvents and hydrocarbons, will not cause resin barrier, will not cause changes in the viscosity of the paint, and good compatibility with the paint; It can quickly and cleanly eliminate a large number of hazardous foam produced by the process of pump, screen and coating in the process of gas knife and scraping force coating. In the coating process, it can quickly and cleanly eliminate small foam, and will not produce pinholes, spots and fish-eye pHenomenon, and thus ensure the quality and beauty of the coated paper. XPJ978 can also be used in other similar coating systems. It can defoam and antifoam in papermaking sizing agents and synthetic latex.
The antifoaming agents we provide are formulated using advanced chemicals under the supervision of our experienced professionals. Advanced formulations and advanced technologies are used to ensure a high level of performance. The manufacturing process is under the strict supervision of our quality control team. These defoaming agents have been praised for their purity, effectiveness and non-toxicity.
Characteristic
1.It has strong function of defoaming and suppressing bubbles.
2.Products do not contain amide, silicone oil, mineral oil, solvents and hydrocarbons.
3.Will not cause resin barriers, will not cause coating viscosity change, and coating compatibility.
4.Can quickly and cleanly eliminate a large number of hazardous foam.
5.In the coating surface process can quickly and cleanly eliminate fine foam.
6.No pinholes, spots and fisheye phenomenon, to ensure the quality and beauty of the coated paper.
Product Application
It is used in defoaming and inhibiting foam of similar coating system, sizing agent of paper making and synthetic latex.
Product Parameters
| Appearance | Light yellow oily liquid |
| Density（20℃，g/cm3 ） | 0.90-1.05 |
| Kinematic viscosity (mPa.s 25℃ ) | 200-600 |
| Moisture | ≤ 1.5% |
Usage Method
The product is directly added to the coating liquid, the product can be emulsified and dispersed in cold and hot water, the general use of 0.2-0.5‰ of the total amount of coating added Add can meet the requirements of defoaming.
Packing & Storage
This product is packed in 200KG galvanized iron drum or IBC ton drum. According to the storage of non-dangerous chemicals under normal temperature storage period within two years.
