XPJ950 is a kind of polyether compound defoamer for flue gas desulfurization in thermal power plants. It is composed of special organic compounds and modified silicone. It mainly inhibits flue gas from producing a large amount of foam during washing by limestone slurry in the absorption tower of wet desulfurization system and prevents the inlet of absorption tower from accumulating ash. The product is non-toxic, non-corrosive, chemical stability, nonflammable, non-explosive; The utility model has the characteristics of strong hydropHobicity, long-lasting foam inhibition and rapid bubble breaking. It has good solubility with aqueous pHase system, no demulsification and bleaching oil, and no secondary pollution. Also, it is widely used in petrochemical sewage, papermaking sewage, leather sewage and chemical cleaning and other foaming systems.
The antifoaming agents we provide are formulated using advanced chemicals under the supervision of our experienced professionals. Advanced formulations and advanced technologies are used to ensure a high level of performance. The manufacturing process is under the strict supervision of our quality control team. These defoaming agents have been praised for their purity, effectiveness and non-toxicity.
1.Inhibit foam and prevent dust accumulation at the entrance of absorption tower.
2.Non-toxic, non - corrosive, stable chemical properties, non - flammable, non - explosive.
3.It has the characteristics of strong hydrophobicity, durable bubble suppression and rapid bubble breaking.
4.Solubility in water phase system is good, does not break milk drift oil, will not cause secondary pollution.
Widely used in petrochemical sewage, papermaking sewage, leather sewage and chemical cleaning and other foaming systems.
Appearance : | Colorless to light yellow transparent oily liquid |
Hydroxyl value (mgKOH/g): | 40-56 |
Moisture : | ≤ 1.5% |
Density(20℃g/cm3 ): | 0.98-1.05 |
Eater solubility: | emulsion |
Can dilute or add the original liquid, with a metering pump will be injected into the absorption tower defoaming agent. The dosage should be determined according to the experiment.The general addition amount is 10-100ppm; The optimum amount of additive is determined by test.
This product uses 200KG galvanized iron drum packaging; According to the storage of non-dangerous chemicals at normal temperature storage period within two years, indoor storage.