Products
XPJ880 Evaporative crystallization Defoamer
Product Description
XPJ880 is a high temperature resistant defoamer made by high-grade fatty alcohol, amide, polyether and other materials through special process. It has the advantages of stable defoaming and persistent foam suppression under strong alkali and high temperature. For example, in the coal chemical evaporation crystallizer, a large amount of foam is frequently generated. After the foam is generated in the crystallizer, the amount of water treated by the crystallizer is reduced, and there is no evaporation. Some of the foam is easily sucked into the compressor, which seriously affects the stable operation of the compressor and the crystallization unit. The use of XPJ880 can quickly eliminate foam in the crystallizer and reduce the problem of foam inhalation in the crystallizer compressor and improve the production efficiency. XPJ880 is also widely used in defoaming systems such as leachate, wastewater treatment, and silicone application limitations
The antifoaming agents we provide are formulated using advanced chemicals under the supervision of our experienced professionals. Advanced formulations and advanced technologies are used to ensure a high level of performance. The manufacturing process is under the strict supervision of our quality control team. These defoaming agents have been praised for their purity, effectiveness and non-toxicity.
Characteristic
1. Under strong alkali and high temperature, it can stabilize defoaming and inhibit foam regeneration.
2.It can quickly eliminate the foam in the crystallizer and reduce the suction foam problem of the crystallizer compressor to improve the production efficiency.
Product Application
It is widely used in garbage leachate, waste water treatment and other evaporation systems, as well as the process of defoaming on the application limit of organic silicon.
Product Parameters
| Appearance : | Light yellow oily turbid liquid |
| PH value; (1% aqueous solution) | 5-7 |
| Kinematic viscosity(mPa.s,25℃ ) | 500-1500 |
| Active matter content | 100％ |
| Density ratio（20℃，g/cm3) | 0.85-0.95 |
Usage Method
Pour the product directly into the metering pump or drop addition. Such as stratified agitate after use, does not affect the effect. The recommended dosage is 1-3‰, which can be increased or decreased according to the specific situation.
Packing & Storage
This product is non-dangerous goods, can be stored at room temperature, do not expose to the sun or close to heat source. With 200 kg iron drum or plastic drum packaging; Under the normal temperature storage for two years.
