page_head_bg

Products

XPJ8350

Short Description:

antifoam Textile Auxiliariesdefoamer antifoam for textiledefoamer for textile


  • Type:

    XPJ8350

  • Classes:

    Hig-content silicone emulsion defoamer

  • Active ingredients:

    siloxane polyether copolymer,polysiloxane,emulsifier, synergist

  • Characteristic:

    It is easy to disperse in the surface active system, and it has a wide range of acid and

    alkali resistance. 

  • Product application:

    XPJ8350 is suitable for most systems which has high requirements for bubble elimination and suppression. It can also be diluted, even if diluted 10 times, it still has a good defoaming effect.

  • Product Parameters:
    Appearance Milky white liquid
    Stability (3000 rpm/20 min) No demulsification
    Non-volatile matter: 50%
    PH value: 6-8
    Density 25℃,g/cm3: 0.98-1.05
  • Application method:

    It can be used on site after dilution or directly added to the device with stirring function.

  • Packaging stored:

    1.This product is packed in 25L/200L plastic barrel, or 200L iron barrels,or 1000L IBC container.

    2.The product will be valid for one years if stored in a cool and dry place. You should pay attention to anti-freeze.

    3.The product is stored and transported as a non-hazardous chemical

  • Product Detail

    Product Tags

    Product Introduction

    XPJ-8350 is a general high-content siloxane polyether copolymer, its active content is up to 50%, which has a high defoaming effect.A very small amount of addition can meet the requirements of defoaming.It is easy to disperse in the surface active system, and it has a wide range of acid and alkali resistance. It is suitable for most systems which has high requirements for bubble elimination and suppression. It can also be diluted, even if diluted 10 times, it still has a good defoaming effect.

    Characteristic

    It is easy to disperse in the surface active system, and it has a wide range of acid and alkali resistance.

    Product Application

    XPJ8350 is suitable for most systems which has high requirements for bubble elimination and suppression. It can also be diluted, even if diluted 10 times, it still has a good defoaming effect.

    Product Parameters

    Appearance Milky white liquid
    Stability (3000 rpm/20 min) No demulsification
    Non-volatile matter: 50%
    PH value: 6-8
    Density 25℃,g/cm3: 0.98-1.05

    Application method

    It can be used on site after dilution or directly added to the device with stirring function.

    Packing & Storage

    1.This product is packed in 25L/200L plastic barrel, or 200L iron barrels,or 1000L IBC container.

    2.The product will be valid for one years if stored in a cool and dry place. You should pay attention to anti-freeze.

    3.The product is stored and transported as a non-hazardous chemical


  • Previous:
  • Next:

  • Write your message here and send it to us